Delivering quality products and solutions
Haldex India is among the largest manufacturers of manual brake adjusters and self-setting brake adjusters in India. The company also manufactures automatic brake adjusters for commercial vehicles and air treatment products such as automotive drain valves for domestic as well as for global customers. Fleet operators prefer our condenser-cum-oil separators (electric and pneumatic) for the ease-of-installation they provide.
ModulT, the Haldex air disc brake, features a unique combination of low weight and high performance across an unbeatably broad field of applications. Weighing a mere 31 kg – including brake pads – it is the lightest 22.5″ available trailer brake. DBT22LT will be followed by the 17.5″, 19.5″ and 22.5″ versions for buses and trucks.
The Haldex Consep®, a low maintenance air pre-treatment condenser/separator, is designed for severe duty cycle applications like heavy loads and frequent stoppages on account of heavy traffic.
Within the vehicle’s air brake system, the Haldex Consep® condenses, separates and removes 90% oil, liquid and other contaminants, treating up to 30 CFM. When prudently installed, Consep® reduces corrosion and probable failure of the air brake system components caused by contamination, significantly increasing air dryer desiccant life.
The third generation of Haldex Electronic Braking Systems for trailers comes with greater than ever capacity.
From trailer lift axles, brake wear sensors, Reset-to-Ride function and Soft Docking to Fleet+, tire pressure monitoring and Info Point, the third generation EB+ integrates considerably more systems than before. EB+ Gen3 accounts for the rapidly growing number of wide-ranging systems that communicate with EBS
The EGP Levelling Valve is a modulating valve for precision suspension adjustment. Its unique modulating valve design responds faster to load changes and accordingly adjusts ride height (without over- or under-adjusting).
The manual brake or slack adjuster assembly used in commercial vehicles has air brakes with ‘S’ cam shaft. The product transmits the braking torque to the ‘S’ cam, facilitating an adjustment of the clearance between the brake lining and brake drum, primarily caused due to the deterioration of brake lining. The slack adjuster assembly is mounted on the ‘S’ cam shaft, one end connected to the push rod of the brake chamber. When the brake pedal is pressed, air enters the brake chamber, thrusting the pushrod out and moving the slack adjuster assembly. As the slack adjuster assembly is mounted on the ‘S’ cam shaft, the shaft rotates and forces away the brake shoes, pressing against the brake drum, resulting in the brake application. The basic function of this product is to convert linear motion into rotary ‘S’ cam motion. When the gap between the brake drum and brake lining is increased due to brake lining wear, the slack adjuster assembly hexagon (adjusting nut) rotates manually that rotates the ‘S’ cam and adjusts the gap between the brake drum and lining.
The Haldex S-ABA automatic brake adjuster leverages innovative self-setting flexible design to offer two benefits that have revolutionised brake adjuster fitting: a free selection of the control arm position and error-free installation.
The Haldex S-ABA functions irrespective of the position of the control arm. Previously a brake adjuster could function with the control arm in one pre-designated position. However, self-setting means no time-consuming adjustments during installation, helping fix the control arm and achieve the correct pre-determined running clearance.
Universal ABS provides a control system for semi and centre axle trailer air braking systems that meet the anti-lock requirement of ECE Regulation 13, Series 11.